Last updated:
Tips and Tricks: Now whenever water is seen flowing from the flush tank of your bathroom. So do not panic, try this 2 minute trick before you get the phone to the plumber, this will save both your time and money.
Fix the bathroom flush tank like this
Highlights
- Repair yourself when water flows from the commode.
- Open the lid of the flush tank and check the washer.
- Clean or change the washer, then install the machine and check.
Tips and tricks: If the flush tank of the bathroom is constantly dripping water. So he not only wastes water. Rather, daily mess is also made, water comes from under the commode all the time and when needed, there is no water in the flush – this problem is very common. People think that it is the job of a plumber to fix it. But the truth is that you can fix it yourself – that too in just 2 minutes!
Many times it happens that you press the flush after using the toilet. But water does not come, this is because all the water of the tank has already gone into the commode, meaning that the water from the tank slowly falls down. Which does not save water at the time of flush.
Know this 2 minute easy trick
-First, lift the lid of the flush tank, there is a plastic machine inside it. Which you can remove with a light hand, this machine only works to flush.
2. See the washer under the machine
-There is a rubber washer in the back of this machine, if this washer is worn or garbage gets stuck in it. So he is not able to stop tight and the water keeps leaking slowly.
-If if the washer is only dirty, then clean it with water, but if it is torn or rotten. So bring a new washer from a nearby hardware shop and change it, it is a very cheap and easily part.
4. Clean the machine and washer space
-Where the washer is fit. Clean the place well with a cloth so that no old garbage remains there.
-After cleaning something and changing the washer, apply the machine again and check the flush and you will see the difference immediately -the leakage of the water will stop completely.
How to take care of flush tanks?
If you want the flush tank to leak again. So once a week, you can add a spoonful of baking soda to it, it will neither be garbage stored in the tank nor the washer will spoil quickly.
