If you want cool air then you should never put hot water in the cooler.For better cooling, the cooling pad should be soaked beforehand.The grass behind the cooler should not be blocked by any wall.
In the scorching heat, everyone looks for a way to stay cool. But the weather is so hot that fan, cooler, AC everything has stopped. Some houses have air conditioners so there is some relief, but there are many people who cannot buy AC. But even those who have a cooler make some minor mistakes which increase the humidity in the room. It is generally known to everyone that humidity does not keep us cool, rather it irritates us even more and it causes continuous sweating. So now the question is, what should be done so that there is no stickiness in the room and no sweating.
Water in cooler- If you use a cooler, it is important to take special care of water. If you want cool air then you should never put hot water in the cooler. Actually what happens is that during the summer season the water in the tank remains hot and we fill the same water through the pipe.
Read this also – AC should not become deadly, people make a big mistake while trying to save money, that is why it catches fire!
But you should know that if you fill hot water in the cooler, then the water that will circulate through the grass will remain hot and the fan of the cooler will throw hot and steamy air into the room. Due to this, instead of cold, the humidity in the room will increase.
One thing you can do for this is that if you feel that the water is too hot, then if possible, put some ice cubes in the cooler tank.
Also read- If the cooler has stopped then definitely check these 2 things, it will start blowing cold air, the room will be cool.
It is important to pay attention to the grass- Secondly, try to ensure that the grass behind the cooler is not blocked by any wall. If this happens then the cooler will not be able to draw air properly. If the backside of the cooler remains open then cold air will keep coming into the room.
Another good way to get more cooling is to pre-soak the cooling pad. When you fill the water tank, let the pump run through the cooling pad. By doing this the grass will be able to absorb all the water beforehand. After this, when the tank is filled, turn on the cooler and enjoy the cool air.
Tags: Tech Knowledge, Tech news, Tech Tricks
FIRST PUBLISHED: June 9, 2024, 10:00 IST
